Interior design questions, answered
Marj Silva Interiors is a boutique interior design studio in Cremorne Point on Sydney's Lower North Shore. These are the questions clients ask most often before a project, from what design costs to whether a renovation needs council approval. Each answer is short and links to the page with more detail.
Interior design questions, answered
Marj Silva Interiors is a boutique interior design studio in Cremorne Point on Sydney's Lower North Shore. These are the questions clients ask most often before a project, from what design costs to whether a renovation needs council approval. Each answer is short and links to the page with more detail.

Showing 37 of 37 questions
Showing 37 of 37 questions
Cost and fees
What interior design costs in Sydney, how designers charge, and what drives kitchen and bathroom budgets.
Interior design fees in Sydney vary with scope: the number of rooms, the documentation a builder needs and how long the designer stays involved. You can safely budget about 10% of your renovation budget for your designer. It varies with the scope, so treat this as a rough guide. The fees page sets out what moves a fee and what is included.
Interior design feesThe fee for one room reflects its size, how far the layout changes and how many drawings the builder or cabinetmaker needs. Marj Silva Interiors sets the fee in a fee proposal, sent within 3–5 days of the first consultation, and for a renovation about 10% of the renovation budget is a rough guide. A kitchen with joinery and stone needs more documentation than a colour and furniture scheme, so scope sets the price more than the room name does.
Fees by serviceA whole-house fee depends on the number of rooms, how much is being rebuilt and how long the designer stays involved through the build. As a rough guide, budget about 10% of your renovation budget for your designer, and Marj sends a fee proposal for your project within 3–5 days of the first consultation. Furniture sourcing and styling are usually scoped separately.
Home renovation designInterior designers in Sydney use one of three models, sometimes combined: an hourly rate, a fixed fee for the project or each stage, or a percentage of the project cost. Marj Silva Interiors sets out the fee for your scope in a fee proposal after the first consultation. A fixed fee gives certainty, hourly suits small tasks, and a percentage ties the fee to the size of the build.
How fees are structuredThe first consultation with Marj Silva Interiors takes about 1.5 hours. Marj uses it to understand your home or business, your lifestyle, design preferences, practical challenges, goals and budget, then sends a fee proposal within 3–5 days, so the next step is based on your actual brief.
Start an enquiryIt often is when a renovation changes layouts, includes custom joinery or involves many finishes, because a designer helps you make decisions early and avoid costly mistakes. Marj Silva Interiors looks at how the whole home works, then prepares the drawings and schedules your builder prices from. A simple like-for-like refresh may not need one.
Home renovation designMany suppliers offer designers trade pricing, and each studio decides whether to pass it on or charge a handling fee. Ask any designer to explain in writing how supplier pricing, purchasing and fees are handled before you sign.
Furniture and stylingA kitchen renovation in Sydney can vary widely, because the size of the room, the cabinetry, the stone, the appliances and any layout or plumbing changes each move the budget. Marj Silva Interiors can give a realistic range for your scope at the first consultation.
Kitchen designA bathroom renovation in Sydney varies with the size of the room, the tile and stone, the fittings, the waterproofing and whether plumbing moves. Marj Silva Interiors can give a realistic range for your scope at the first consultation. Builder and trade pricing then follows from the drawings.
Bathroom design
The designer's role
What an interior designer does, how that differs from other professionals, and how to choose one.
An interior designer plans how rooms work and how they look: layout, storage, lighting, colour, materials, joinery, furniture and the drawings builders follow. Marj Silva Interiors does this for homes and selected small businesses, and can stay involved through the build to the final styling and installation.
ServicesA decorator typically focuses on surface and furnishing: paint, soft furnishings, furniture and styling. A designer also plans the space itself, including layouts, joinery, lighting and the drawings a builder works from. Marj Silva Interiors offers both, from colour and styling on their own to full renovation design.
Colour consultancyIt depends on the work. A project that changes structure, adds floor area or needs a DA drawn up usually involves an architect or building designer. An interior designer plans the rooms inside: layout, joinery, finishes and fittings. Marj Silva Interiors works alongside builders and consultants, and many renovations use both.
Home renovation designA kitchen designer concentrates on the kitchen itself, often through a supplier or cabinetmaker. An interior designer plans the kitchen as part of the surrounding rooms, so colour, floors, lighting and joinery carry through. Marj Silva Interiors designs kitchens on their own or as part of a whole home.
Kitchen designLook at completed projects similar to yours, ask how fees and stages work, and meet the designer to see whether you communicate well. Check what the designer does once building starts. Marj Silva Interiors shows its completed homes and a small commercial project on the projects pages, and the first consultation is the place to test the fit.
About the studioAsk how fees are structured, which stages are included, who does the drawings, how the designer works with your builder, and what happens if the budget changes. Ask to see projects like yours. Marj Silva Interiors welcomes these questions at the first consultation and covers budget and timing from the start.
How a project runsNo. NSW has no licence or registration scheme for interior designers, unlike architects, who must be registered with the NSW Architects Registration Board. Licensed trades such as waterproofers and electricians do need licences. Marj holds an Advanced Diploma of Interior Decoration and is a member of the Design Institute of Australia (DIA), the National Association of Women in Construction (NAWIC) and the Kitchen and Bathroom Designers Institute (KBDI).
Design Institute of Australia on NSW recognition (opens in a new tab)
Process and timelines
How a project runs, when to start, and how long each stage takes.
Marj Silva Interiors works in five stages: an initial consultation, concept development, design documentation and selections, design coordination and implementation, and furniture, styling and finishing. Each project is tailored, so the scope of every stage depends on your property and what you have asked the studio to do.
The five stagesDuration depends on scope: one room takes far less time than a whole home, and approvals, supplier lead times and how quickly selections are made all play a part. Design and documentation typically take 4–12 weeks with Marj Silva Interiors, and a whole project usually runs 3–6 months. Build time is set by your builder.
How a project runsA kitchen renovation has two parts: design and documentation, then the build. Kitchen design and documentation with Marj Silva Interiors typically take 6–8 weeks. The build depends on the cabinetmaker's lead time, stone fabrication and the trades, so ask your builder for a programme once the drawings are final.
Kitchen designA bathroom renovation has a design stage and a build stage. Bathroom design and documentation with Marj Silva Interiors typically take 4–8 weeks. The build depends on demolition, plumbing, waterproofing and curing times, tile and stone supply, and the trades, so your builder should give a programme from the drawings.
Bathroom designBefore, ideally. A designer who starts early can settle the layout, joinery and finishes first, so your builder prices from complete drawings rather than guesses. That helps you make informed decisions early and avoid costly changes on site. If the builder is already chosen, bring them into the conversation early.
How a project runsYes. Marj prepares the drawings and finish schedules your builder and trades work from, coordinates with them and with consultants, and answers design questions during construction. Marj Silva Interiors can work with the builder you have already chosen or recommend builders and trades suited to the project.
Home renovation designYes. Marj Silva Interiors takes on everything from a single-room redesign to a complete home renovation. A kitchen, an ensuite, a wardrobe, a wall of joinery or a colour scheme can each be a project in its own right, and many clients return later to add more rooms.
Custom joineryYes. Marj Silva Interiors measures and assesses the furniture you already own, works out what will fit, and develops a layout before moving day. You decide what to keep, replace or repurpose, and where custom joinery could help, so the new home feels settled from the first day.
Moving house planning
Approvals and regulations
DA and CDC pathways, internal walls, waterproofing and heritage homes in NSW.
Often not. Kitchen and bathroom renovations are generally exempt development in NSW when they meet the exempt standards and the room's layout does not change. Moving walls, or heritage and strata rules, can change that. Check with your council or a certifier. Marj coordinates the design for whichever pathway applies.
HIA: are kitchen and bathroom renovations exempt? (opens in a new tab)A complying development certificate (CDC) is a faster approval, issued by a council or private certifier, for work that meets fixed standards. A development application (DA) goes to council when the work, or the land, falls outside those standards. Which applies depends on your site, so confirm with council or a certifier.
How a project runsUsually yes. Removing or moving a wall is not exempt development, even a non-loadbearing one, so it needs a CDC or a DA. A wall may also carry structural load, which an engineer should assess. Confirm the right pathway with your council or a certifier before any work starts.
HIA: kitchen and bathroom exempt development (opens in a new tab)Marj Silva Interiors offers design coordination for the CDC or DA pathway, working with your builder, consultants and certifier. Certification itself sits with the certifier or council.
How a project runsWaterproofing work valued over $5,000 in NSW must be done by a licensed contractor, and councils and certifiers commonly ask for a waterproofing certificate from the installer for wet areas. Requirements depend on how the work is approved, so ask your waterproofer and your certifier or council before the job starts.
NSW Fair Trading: waterproofing licences (opens in a new tab)Yes. Marj Silva Interiors designs interiors for character-filled heritage properties that respect the architecture. Approvals differ: complying development is not available on listed heritage items, and in heritage conservation areas only some is allowed, with extra standards, so a DA is often needed. Check the listing and rules with your council before planning changes.
NSW Codes SEPP (legislation.nsw.gov.au) (opens in a new tab)
Colour and design
Practical answers on paint, wardrobes and kitchen islands.
Start with the light and the fixed finishes, not a paint chip. Natural light direction, floors, stone and large furniture shape how a colour reads, so test big samples on the wall and look at them morning and night. Marj Silva Interiors offers colour advice, including paint colour and finish selection, from one room to a whole home.
Colour consultancyChoose the fixed elements first, such as floors, benchtops and tiles, then pick a palette that links the rooms and vary the depth from room to room. Marj Silva Interiors prepares whole-home colour schemes and material boards, so paint, stone, timber and metal are chosen together instead of one room at a time.
Colour consultancyBegin with what you own: measure hanging lengths, shelf stacks and shoes, then allow a clear aisle of about 900 millimetres to a metre so you can open drawers and turn around. Marj Silva Interiors designs walk-in and built-in wardrobes as custom joinery, with drawings the maker builds from.
Custom joineryA common guideline is about 1,000 to 1,200 millimetres of clear space between an island and the bench or appliances opposite, and more if two people cook together or oven doors open into the aisle. Marj Silva Interiors tests the island size against your household's layout and circulation.
Kitchen design
Property types and areas
Apartments, small businesses and the suburbs the studio works in.
Yes. Marj Silva Interiors designs apartments and townhouses as well as houses. In a strata building, an owners corporation may need to approve work that affects common property, so check your by-laws and committee early. Marj can plan a design that is ready for that conversation.
Residential interior designYes, for selected small projects. Marj Silva Interiors designs boutique commercial interiors such as retail and showrooms, beauty and wellness spaces, client-facing studios and small offices, covering space planning, joinery, colour, lighting and furniture, fixtures and equipment so the space carries your brand.
Boutique commercial designMarj Silva Interiors is based in Cremorne Point on Sydney's Lower North Shore and works with clients across the North Shore and the Eastern Suburbs, from Manly to Riverview and Vaucluse to Balmain. That includes Mosman, North Sydney, Crows Nest, Cammeray, Waverton, Lane Cove, Hunters Hill, Castlecrag, Northbridge, Seaforth, Balgowlah, Freshwater, Potts Point, Point Piper, Woollahra, Bondi, Bronte, Rozelle and Annandale.
Lower North Shore
Tell us about your space
- Call
- 0415 097 480
- marj@marjsilva.com
- Studio
- Unit 3 / 121 Cremorne Road, Cremorne Point NSW 2090
Monday to Friday, 9am–5pm